Which boiler can be closed in the kitchen. Kitchen design with gas boiler. Mounted and corner heating equipment

According to current SNiP, installation of a gas boiler in the kitchen is permitted. Subject to certain conditions, installation of heating equipment with a total power of up to 60 kW is allowed. General instructions and the requirements are described in SNiP 02/31/2001, 01/31/2003.

Is it possible to install and close a gas boiler in the kitchen?

A planned kitchen renovation can be a real test for owners, especially if the apartment or house has autonomous gas heating. SNiP strictly stipulates not only the installation of a new one, but also the replacement of an old boiler, its location in relation to plumbing units, windows, and hoods.

Existing standards allow the installation of a wall-mounted or floor-standing gas boiler in the kitchen if this room is not used as a living space. In this regard, there are two popular methods for installing heating equipment:

• Installation in a special boiler box – this option allows you to hide the body by mounting it into kitchen furniture. It is not possible in every case to disguise a wall-mounted heating boiler placed in the kitchen by hiding it in a box, according to safety rules.
• Installation of a boiler with a decorative external panel. European manufacturers have long understood that boiler equipment, in addition to heating, must perform another important function: decorate the kitchen in which it is installed most often. View of the kitchen from gas boiler, should be no worse than without it. For this reason, equipment models are produced in chrome, wood, with a beautiful snow-white panel, etc.

Although the design of a kitchen with a gas boiler on the wall or on the floor is important, the requirements and building regulations cannot be sacrificed for the sake of aesthetic value. According to SNiP 31-02-2001, 31-01-2003, there are some restrictions limiting the free placement and decoration of heating equipment running on natural gas.

You can beat a gas boiler in the kitchen with a kitchen set, but it is important to remember the need for unhindered air flow to the equipment with an open atmospheric burner. Condensing and turbo boilers do not have such restrictions.

Is it possible to place a boiler in a kitchen combined with a living room?

For installation, the requirements described in SNiP 31-02-2001, 31-01-2003 are met. In particular, the regulatory documents note:

• Gas boilers, water heaters and stoves are strictly prohibited from being installed in residential premises. The ban is related to existing sanitary and safety standards.
• Living room and bedroom are considered living rooms, the kitchen and dining room are classified as non-residential premises.
• An individual heating gas boiler can be placed in the kitchen, provided that it has a window with a window, as well as a door separating the corridor.
• The kitchen-living room cannot be used for installing gas heating equipment.

Developers go to certain lengths to try to make the installation legal. In technical documentation, the term “kitchen-living room” is changed to “kitchen-dining room”. In this case, the requirements are met. Restrictions on the placement of the boiler apply exclusively to residential premises, and the kitchen and dining room are classified as non-residential rooms. Installing a boiler in the kitchen has its own restrictions not only on placement, but also on the choice of heating equipment, which must be taken into account at the stage preparatory work. There are three main types of household heating equipment, differing in operating principle, and each has its own distinctive characteristics:

Turbocharged and condensing heat generators are controlled by microprocessor automation and depend on the availability of electricity in the network. The connection to the electrical network is carried out by uninterruptible power supply.

When deciding exactly how to place the boiler in a niche or in furniture cabinet, take into account the need for additional space for related equipment.

Requirements for installing a boiler in the kitchen

The kitchen layout is carried out taking into account the requirements that apply to the installation of gas heating equipment. Active regulations define:

1. The presence of a door separating the kitchen and other rooms.
2. Minimum requirements for window openings.
3. The presence of supply and exhaust ventilation.
4. Location of the socket, boiler pipes.
5. Requirements for the smoke exhaust system.

The interior of a kitchen with a gas boiler on the wall or floor must strictly comply with current SNiP and sanitary standards. If gross violations are detected, a representative of the Gas Industry has the right to turn off the gas supply and impose penalties.

When installing a gas boiler, the main thing should be compliance with the rules safe operation. Aesthetic value is of secondary importance.

Do I need a door to the kitchen when installing a gas boiler?

The requirements for installing gas heating boilers in the kitchen stipulate that the room must be separated from the corridor and living rooms by a door leaf. It is strictly forbidden to replace the door with an arch.

Doors in a kitchen with a gas boiler installed should not have a lower threshold for unhindered air circulation. As an alternative, it is allowed to insert a convection channel into the canvas, covered with a decorative panel.

Do you need a window in the kitchen if there is a gas boiler?

Rules for placing gas heating boiler in the kitchen, in particular, SNiP 31-01-2003, stipulate the need for window opening with installed window. Strictly speaking, metal-plastic double-glazed windows with an opening window (without a window) are a violation of the norms. But usually representatives of the gas service do not pay attention to this.

A window, like convection holes in the door to the kitchen, is necessary to ensure continuous circulation air flow. If you want to integrate a gas boiler into kitchen furniture, it is important to carefully choose the location so that it matches the direction of the circulating air. Convection holes are also made in the facade of the furniture.

Ventilation in the kitchen with a gas boiler

As practice shows, it is better to choose a boiler that can be hung on the wall. This facilitates air flow to the burner device. Even models with a closed combustion chamber, although in a smaller volume, still burn air from the room. Therefore, there are strict requirements to kitchen ventilation:

• Combine the hood for a gas boiler with kitchen hood, existing rules prohibited. The requirements stipulate the need for a separate channel.
• When installing a boiler in a kitchen, the diameter of the ventilation duct is calculated taking into account the performance of the heating equipment. Calculations are performed by specialists from the Ministry of Emergency Situations or a related organization. After calculating the diameter ventilation pipe, an act of compliance of the channels with the required parameters is drawn up. The document is registered at the Ministry of Emergency Situations.
• The rules for installing a hood take into account the necessary air exchange in the room. According to clause 9.2, SNiP 31-01-2003, a multiplicity equal to 1 m³/hour + 100 m³/hour with the heating equipment turned on is taken into account. For atmospheric burners, double air exchange is taken into account. For heat generators with a closed combustion chamber, single.

What should the ceiling be like in the kitchen?

A ceiling made of plasterboard or fire-resistant is ideal GVL slabs. SNiP requirements allow the use of any type of non-combustible material. At the same time, the recommended height from the floor at which a gas boiler is hung in the kitchen is from 80 to 160 cm, and the minimum gap between the boiler body and the ceiling is 80 cm.

According to this rule, do suspended ceiling in the kitchen, if you plan to install gas-fired boiler equipment, it is not recommended. Prohibited use plastic panels. It is recommended to use gypsum and cement-sand plasters with subsequent painting of the surface.

Where should the boiler socket be installed?

The distance from the gas heating equipment to the outlet is specified in the operating instructions. This requirement is controlled by Gaznadzor authorities. The electrical outlet for the boiler should be installed no closer than 1 m.

Another requirement is correct location refrigerator in the kitchen, relative to gas heating devices. The minimum distance must be at least 30 cm. The gap is necessary for servicing the boiler.

How to hide gas boiler pipes

Existing standards prohibit covering the risers of main communications with non-removable structures. In practice this means the following:

• It is prohibited to hide pipes in grooves in the kitchen. Although it is possible to achieve the commissioning of boiler equipment, at the first inspection, the inspector will issue a fine with instructions to provide free access to communications.
• The boiler and the pipes connected to it can be closed only with a decorative removable box. At the same time, it is extremely important that the communications remain in a free position and there is access to the shut-off valve. Hiding the pipes with a box of a removable structure is quite simple and does not require significant material costs.

How to remove a chimney from a kitchen for a gas boiler

In order to correctly position a gas boiler on the wall in combination with a kitchen unit, you will need to take into account the passage of the chimney. Boiler equipment installed as close as possible to the location where chimney goes outside. This way, you can avoid the need to drill holes in the cabinets for the passage of the chimney.

The coaxial chimney is discharged through the wall. Atmospheric models are connected exclusively to a specially designed exhaust duct.

The requirements and standards stipulating the installation and placement of gas boiler equipment in the kitchen require strict compliance. To avoid mistakes, you should consult a gas service inspector.

A heating boiler can be decorated with a kitchen set only if the dimensions of the cabinet ideally match the dimensions of the boiler. Otherwise, you need to choose another method to disguise gas appliance in the kitchen.

Many owners of both private cottages and apartments in multi-storey buildings, decide to disconnect from the heating plant and install heating system. As a rule, a gas boiler is installed in the kitchen. An ordinary white unit can disturb the interior of the room, so they think about how to fit the boiler into the existing design.

The gas boiler can only be installed in non-residential premises, and the presence of a window and a door is mandatory!

The design of the part of the room where the boiler is installed needs to be thought out before installing the heating device.

How to hide a boiler:

• Homemade chipboard box for the boiler. Ideally, the front panel of the box should coincide as much as possible with the facade kitchen set.
• Niche made of profile and plasterboard. The front part of the structure is also closed with a door under general style kitchens.
• Finishing the boiler with film or special paint.

When installing new furniture, you need to discuss in advance the size and location of the cabinet for the boiler. The wiring of communications is also taken into account, which can be hidden if desired.

Floor-standing AGV can be installed in the corner of the kitchen according to the installation rules. It is also allowed to hide the floor-standing boiler in a cabinet-cabinet, while complying with the standards and safety rules.

Kitchens with a gas boiler: design and installation of a chipboard cabinet

If the gas boiler was installed after purchasing the kitchen set, and there is no way to hide it in one of the existing cabinets, you can decorate it with a homemade door. To make a boiler cabinet with your own hands, you will need chipboards and wooden slats.

In addition to the tools - tape measure, bolts, jigsaw and awnings, you will need a ready-made door that is closest in color to the kitchen facade.

Before starting work, you need to accurately calculate the dimensions of the gas boiler. The minimum distance from any side of the boiler to the cabinet is 3 cm, respectively, add 6 cm to the height and width of the boiler and select a door of this size.

Progress:

1. From chipboards Using a jigsaw you need to cut out the side walls of the cabinet based on the measurements. The depth should also be 3-4 cm greater than the depth of the gas boiler.
2. Make holes in the bottom wall for water and gas supply pipes, and in the top wall for the chimney.
3. Use a crown to cut holes for furniture curtains on the right or left side.
4. Maintaining perpendicularity, fasten all sides of the cabinet together with bots. There should be no back wall; instead, attach two planks parallel to each other at the top and bottom.
5. Attach the fasteners to the kitchen wall using the fixed slats. Hang the cabinet door with curtains.
6. Attach the resulting structure to the boiler and hang it on the wall.

A wall-mounted boiler can be placed in the corner of the kitchen by mounting it in a wall-mounted corner cupboard or cover it with the same homemade door. If desired, you can leave the device open and disguise it beautiful decor– stickers or decals.

Kitchen in a private house with a gas boiler: installation rules and regulations

Placing a gas boiler in the kitchen requires certain rules and regulations. Failure to comply with them can lead to serious consequences. The room in which the gas boiler is installed must be at least 4 square meters, more than 2.5 m high, have a window and a door to the corridor. There must be a device in the kitchen that will notify you of a gas leak.

The power of gas boilers installed in the kitchen should be no more than 60 kW. The heating boiler can be installed on the floor or attached to the wall.

You will learn about the operating principles and design of double-circuit boilers in the following article:

The gas boiler is attached to the wall, which is made of non-combustible materials. The boiler must not be installed close to cabinets; there must be space for air circulation between the appliance and the walls of the furniture.

The layout of gas and water pipes must be carried out in accordance with the rules. The gap between the boiler and the refrigerator and gas stove must be at least 30 cm. The heating boiler is installed at a distance of at least 0.8 m from gas meter at a height of 1.6 m. Electric outlet for the boiler is mounted at a distance of 1 m.

After the boiler is installed and all lines are connected, it is strongly recommended to check its operation and the chimney draft - the safety of using the device depends on this.

Kitchen interior with a gas boiler on the wall: how to hide communications

Having resolved the issue of masking a gas boiler in the kitchen, the question often arises of gas and water leading to the appliance. The bulky, ugly chimney and hoses connecting the unit to the individual heating system are also not pleasing to the eye.

Under no circumstances should all elements be covered in the wall; they must be accessible if necessary!

Today, the most popular option for hiding communications is a box made of profiles and plasterboard, which can be covered with tiles or wallpaper. When installing the box, you should use moisture-resistant drywall.

The gas pipe can be hidden behind the kitchen unit. In this case, cabinets and bedside tables should not put pressure on the pipe; you need to leave about 1 cm of free space between them. If the pipe runs at a height of more than 1 m from the floor, you can use it as a stand for towels. To do this, the pipe is cleaned of rust and coated with several layers. chrome paint– after drying, you can hang towels and napkins on it.

Corner plumbing or gas pipes, which cannot be covered with a cabinet, can be decorated with artificial flowers or fruits, decorated glass mosaic, paint with colored paint to match the interior of the room.

Question to the designer: how to hide a gas boiler in the kitchen (video)

Hiding a gas wall-mounted boiler is not a problem if you approach this matter wisely. After correct calculations and installation of a homemade cabinet, you need to think about gas and water pipes, which can also disrupt the entire design of the room. Perfect option- sew them in plasterboard box and decorate with tiles.

Examples of how to hide a gas boiler in the kitchen (photo)

Loft includes antiques brickwork, trendy or antique furniture. It is distinguished by its simplicity in the design of the walls, ceilings and floors. For clarity, it can easily be equated with Provence. This style is varied in its elements., it is inconsistent in detail and widely used in practice.

Historical reference

Loft originated in the first half of the twentieth century. The foreign origin of the name of the style, translated into Russian, is an attic. Bearing structures not plastered, leaving it in its original condition. The beams that support the roof were not covered, since the upper floor is intended for old unnecessary things. During the economic crisis, attics and attics were occupied. This happened with other objects as well.

Unclaimed abandoned industrial buildings that appeared in America in the forties were passed on to citizens in need of housing. Having mastered them, the layout, unacceptable for these purposes, was left unchanged.

Modern directions

In the technology of building houses with one and a half or two floors, attics have become popular. The need to use the entire area of ​​the house led to their reconstruction. This made it possible to make them residential. The Minimalist style, corresponding to Loft, has found application in the design of these buildings as rooms.

Advantage

Using this method, the cost of renovation in the Loft style will become economical. Without purchasing expensive finishing materials, they use what they have, correctly adjusting individual parts of the structure.

When reconstructing a previously used building, everything brick walls left in its original form. Their varnished or water-based paint wanting to give them light shade. A natural stone, brick or old whitewash complement modern or antique interior in the style of Minimalism. Against the background of such walls, individual elements look trendy.

The kitchen should contain only household items that have a direct functional purpose. Her modern version complemented by a gas boiler for heating water. Doing design project, the reconstructed space is left spacious. It is filled with functional furnishings. If heating pipes and hot water are not connected to the house on a general basis, they are installed in it special equipment, compensating for this gap.

Design project with a gas boiler

Family members often gather in the kitchen. It is convenient to make a dining room if the areas are large. Create with gas boiler design it is possible in spaces using zoning, dividing it into functional territories. This is done using finishing material, lighting, plumbing equipment, furniture and household appliances. Select work area, is to concentrate items related to cooking and storing household utensils in one of them. For the integrity of each individual territory, it is supplemented with light elements.

Work zone

The central part of it is an apron on the wall, which is placed above the stove and sink. I recommend choosing a material for its design that is similar in style. A boiler is installed on the side of the sink. Depending on what it is, its fastening depends. In this case, the water supply is uninterrupted. To enhance to achieve this effect, a circular pump is connected to the water supply. The floor in the proposed style is laid according to it. To do this, use tiles or porcelain tiles imitating old boards.

A kitchen with a gas boiler can be aesthetically decorated. To do this, the unit is covered matte paint for light-colored metal. To do this, use shades of matte steel, bronze or shine. A design is applied to the outer body with a stencil. It is also painted by hand. Ready-made stickers will be a convenient help, creating the necessary color in the kitchen.

One of the equipment placement options is using the opening between wall cabinets , leaving the outer casing free for air access and preventative control over its operation. Devices installed underneath must be visible.

Place the heating apparatus in a fake cabinet. It's easy to make. The two sides are connected with a lattice door, leaving the upper part free. To protect against heat, a foil cover is made inside.

• The volume of the boiler depends on the need for water supply.
• When developing the project, the safety requirements for placing a gas boiler are taken into account.
• In a private house, water heating equipment can be used for contour heating and domestic needs.
• The boiler is installed in a place convenient for preventive maintenance.
• It's not hidden in closed closet and do not attach above the stove.
• Frequent ventilation of the room will ensure the environment in it.
• A floor-standing unit will require less imagination to disguise it.
• Non-flammable material is used for the walls and floor adjacent to the heating apparatus.

What's the best way to hide pipes?

• They are not recommended to be hidden in walls.
• Gas pipes are laid in an open way.
• They should be visible.
• They are placed under the furniture, making an angular cut at the base.
• Plasterboard coverings for pipes will provide aesthetic perception interior
• They are made in the form of a box.
• The gas pipeline is not used as a support.
• They are painted in those colors that enliven the interior.
• Glass blocks will hide the equipment without disturbing the integrity of the space.

Conclusion

Installation and installation of technological kit gas equipment entrusted to professionals. They will remove the chimney pipes, insulate and insulate it. The company will supply the equipment for which they will be responsible. After putting the unit into operation, the customer will not have to worry, as the warranty service within a year without additional investment. The quality of the installation determines its service life and the safety of the residents of the house.

Now we will look at how to hide a gas boiler in the kitchen and what requirements for its installation currently apply in order to comply with safety rules.

Find out the price and buy heating equipment And related products you can with us. Write, call and come to one of the stores in your city. Delivery throughout the Russian Federation and CIS countries.

Plasterboard construction

Furniture to order: one of the most practical ways, since today there are various companies, providing services for its production. Having ordered special furniture, you can hide not only the boiler itself, but also pipes and communications;

Drywall: inexpensive material from which you can build a box to disguise a gas boiler from prying eyes. The box must have a door that, if necessary, will provide access to the unit; it can be painted in the color of the interior or, for example, covered with wallpaper to give a more presentable look.

Boiler case

To hide a floor-standing boiler in the kitchen, a pencil case is suitable. In addition to the boiler itself, it allows you to hide the gas and drainpipes. Moreover, you can order it at various options execution.

This option is suitable for a boiler with a closed combustion chamber, because most of the manufactured gas boilers with open camera combustion cannot work without open access to the air.

At the same time, the design of the canister used should allow unhindered maintenance of the boiler, ensure constant air circulation, not tip over, and be quickly disassembled if necessary.

Therefore, it is also not worth ordering sliding doors, which will narrow the opening and limit access to equipment and all communications.

Often a floor-standing boiler in the kitchen is installed under the windowsill. In this case, the front panel must be equipped with ventilation grilles.

So that the installation of a gas boiler does not become an obstacle to creating a beautiful and cozy interior, there are many ways to decorate decorative doors and panels: forging, carving, painting, stained glass, frosted heat-resistant glass.

Therefore, installing a gas boiler in the kitchen does not seem such an impossible and difficult task. The design of the room will definitely not suffer from this.

In modern new buildings, systems are increasingly being used autonomous heating, which allow residents not to depend on the mood of utility services. The apartments are equipped with units that create a comfortable indoor temperature for a particular family. The owners of these apartments are the real lucky ones: when in the chilly autumn the whole city is tensely waiting for the coveted connection, they turn on the gas boiler in one motion and, voila, the house becomes warm and comfortable. However, even these darlings of fate are faced with a difficult task during renovation: how to think through the design of a kitchen with a gas boiler? The most interesting thing in creating such an interior is deciding how to play with this complex mechanism so that, depending on individual preferences, it either solos or dissolves in the kitchen ensemble.

Technical difficulties

Gas services operate according to the principle “You can’t!”, you must always remember this and try artistic means design the kitchen so that it is convenient for your family, makes a lasting impression on guests, but does not infuriate the engineers servicing the VDGO. Don't you need fines?

So, what requirements must be met when planning a kitchen design with a boiler?

Specifications	Can
Ceiling height of at least 2.5 m
The volume of the room (the air inside it) is at least 15 cubic meters.	Combine the kitchen with the dining room (not with the living room!), leaving the opening open and thus increasing the volume of air.
Ventilation providing at least three air changes in the room in 1 hour
A window with a mandatory window and a glass size (light opening) of 0.03 sq.m. per 1 cubic meter room volume	Nowadays, during construction, double-glazed windows without windows are used and gas services “turn a blind eye to this”
The door between the kitchen and living rooms with a distance from door leaf at least 2 cm to the floor surface.	If a classic door is absolutely not convenient for you (the layout of the room does not allow you to take into account all the standards), use sliding doors, sliding doors (going into the wall), accordion doors

Very important: understand the SNiP “Gas Supply” standards yourself. Of course, you trust your designer, he is a professional. But in practice it often happens that it is better to check everything yourself.

In a new building, private house, old apartment

At the time of buying new apartment with the AOGV system, you already get a room with a wall-mounted gas boiler, which is located where the gas workers placed it. Moving it involves a lot of technical, paperwork, time and financial difficulties, so it’s easier to leave everything as is, and hide the device and pipes in a furniture column that will line up with all the cabinets of the set. With this placement option, it is necessary to leave the top of the column open and provide big hole(it can be camouflaged ventilation grille like a built-in refrigerator) to ensure the necessary air exchange, and calculate inner dimensions pencil case so that the required air gaps remain. Yes, and room thermostat you will have to make it remote so that it measures the real temperature of the apartment air.

Without erecting complex design, and leaving the unit open, you can place it in a series kitchen cabinets, choosing the color. Beige, matte gray, silver, yellow, bright red, coffee, blue, lingonberry, charcoal black - modern devices the widest color range. Or ask the graffiti masters - they will paint the front panel in all the colors of the rainbow. And your “warm” friend will look great in the tone of the furniture or in contrast with it.

If you are the owner of a private house, how will you arrange necessary equipment and tying kitchen furniture to it depends only on three factors:

• your imagination;
• room size;
• preferred style.

Don't forget to put non-flammable flooring in the area where the gas boiler is located, even if the rest of the area has oak parquet.

In ancient (pre-revolutionary) houses and buildings from the Stalinist Empire style, niches are found in almost every room for cooking. But if you don’t have it, then you can design it yourself and entrust the implementation to the masters. By visually changing the space, transforming its volumes, you will make it more non-standard, and the interior will only benefit from this.

A gas boiler hidden in a niche made of gypsum fiber board or light blocks, and closed with mesh doors that duplicate kitchen fronts, or imitating Italian shutters (if you prefer a retro style) will be perceived by the eye as an interesting volume of the wall, the highlight of the layout. When fitting the device into a niche, it is necessary to provide a small gap between it and internal surfaces boxes that are finished with non-flammable materials or coated with special paint. The distance from the walls to the unit should be at least 2-3 cm on each side.

Gas boiler as an art object

The easiest way to make a gas boiler the center of your kitchen universe is if the kitchen design is made in the following styles:

• Retro;
• Loft;
• Country;
• Modern;
• Futuristic minimalism (then numerous pipes that are intertwined at impossible angles can be easily decorated, and the entire structure will look like an installation from the Museum of Modern Art).

The range of modern gas boilers is very wide: from replicas of ancient equipment with an external body made of polished copper, in which everything inside is made according to last word technology, huge floor systems, combining many functions and reminiscent of English ovens victorian era, to models that look like an instrument taken from a spaceship.

If your artistic taste is consistent with the available funds, then such a unit can become the dominant feature, the center of attention of the kitchen-dining room. Ask yourself: are you ready for the constant admiration of everyone who sees this miracle, and the praise that flatters your pride? If so, then a kitchen design that revolves around a gas boiler is an option for you!

How many square meters Should the area of ​​the room be large enough for gas equipment to be located in it according to the standards? Start from the Khrushchev buildings - they only have 4-5 sq.m. How less space, those more interesting task, which the designer (or you, if you have taken on this role) has to implement.

Choose a decent result technical progress Professional consultants will help you with power and characteristics, but you will have to decide which is better: floor-mounted or wall-mounted. Nowadays, attachments are the most popular; they are smaller in size, but are not inferior to their down-to-earth counterparts in terms of performance. So, it would seem, the choice is obvious. But this is only if you start repairs from scratch. And if you are doing renovations in old apartment and there is either no opportunity or desire to change an expensive item?

In the kitchen small size It is better to use the boiler in the upper part of the room. You don’t have to cover it with a removable box or an imitation of a fragment of a kitchen set. But even if you plan a floor one, then place it near the wall (corners) where the door is located. According to the laws of the psychology of perception, a person pays less attention to objects located to the side and behind him when he enters a room. The best option the left position is considered, because most people start their review on the right.

By designing a small kitchen with a floor-standing gas boiler, you further narrow the scope of possible design ideas. Use shades of white on large surfaces (walls, ceiling, floor, curtains or blinds), it is optimal in this case, choose open shelves, reduced dimensions kitchen furniture and a snow-white cauldron. General minimalism and monochrome will help make the room airy, providing more free living space.

Precautionary measures

So that in a house, especially a wooden one, everyone lives happily ever after and the whole family gathers in a warm beautiful kitchen drink tea with buns while developing a design kitchen interior which includes a gas boiler on the wall, pay attention to the following points:

1. Be sure to consider the placement of gas detectors (gas leak sensors). These devices are almost invisible, but can save your life.
2. Trust the connection of gas equipment only to official specialists.
3. Provide a device supply ventilation to receive fresh air inside the room was constant.