We create furniture for dolls: an armchair, a fireplace, an ottoman. Do-it-yourself doll furniture - we equip a house for dolls How to make a sofa for dolls with your own hands

Giving or making a home for your daughter for her dolls is just the beginning. Next, this house will have to be furnished. This is a bunch of toy furniture, appliances, accessories. How to make furniture for dolls with your own hands will be described in this article.

How to determine the size

Dolls, their houses and furnishings are miniature copies of us and our dwellings. And the most reliable way to make doll furniture with your own hands and not make a mistake is to measure real objects, reduce them several times, and then work with the values ​​obtained.

Furniture for dolls - copies of our furniture

How much to reduce the actual size depends on how small or large the doll is, because they are from 7 cm to 60 cm or even higher. Accordingly, they need furniture of different sizes. To determine the number by which real dimensions should be divided, we divide the average height of a person in centimeters (170 cm) by the height of the doll. Let's get some number. Here it will be necessary to divide the dimensions of real furniture into it.

For example, the height of the doll is 15 cm. We calculate: 170 cm / 15 cm = 11.3. Here we divide all the parameters of “human” furniture by this number. It should also be said that exactly 14-15 cm is the most popular size among the puppet population. Therefore, most of the finished furniture is made in a ratio of 1:12. We can also use the available dimensions, at least in order to be able to navigate with the scale of the required parts and the amount of materials.

So, the most common sizes of dolls:

• male doll 150 mm;
• female doll - 140 mm;
• baby doll - 75-100 mm;
• toy baby - 65-75 mm.

If you need furniture for dolls of similar sizes, its parameters will be as follows:

If the toys you have are slightly larger / smaller, you can not adjust the sizes. With a large difference, you will have to increase or decrease (or you can calculate it yourself).

Doll furniture from matchboxes

The easiest way is to make furniture for dolls with your own hands from ordinary matchboxes. They are glued together with PVA glue, creating certain designs, then pasted over with paper or cloth, self-adhesive film, etc. Wooden beads can be used as legs, drawer handles can be made from small buttons on legs or from long beads.

From matchboxes you can make chairs, a table, a chest of drawers, a bed, a bedside table. Another thing is that furniture is obtained for very small dolls, no more than 10 cm high. Although, you can use more boxes by gluing them into blocks, and from these blocks create furniture for dolls about 15 cm high. Also an option, but work with others materials are not much more difficult, but they are more plastic and allow you to create products of more elegant forms.

This may be your first experience in making doll furniture. Later it will be possible to take on something more serious.

Cardboard Dollhouse Furniture

You can try your hand at making furniture for dolls using cardboard. The material is inexpensive, affordable, it will be possible to try and make mistakes, redo it. Cardboard is usually connected with PVA glue, you can use a glue gun or any universal glue that can glue cardboard, fabric, wood. Just making furniture for dolls with your own hands from cardboard, you will still use these materials. If we talk about convenience, then a glue gun is preferable - it glues quickly, it is convenient to work, the connection is reliable.

To make furniture for dolls, you can use ordinary packing cardboard. It is cheap, but the furniture from it is very delicate. It is unlikely that the child will have enough of it for a long time. But, as a "first experience", this is a good option. Scrapbooking cardboard products are more reliable. It is more dense, uniform, has a different thickness (from 2 mm or more), can be with a textured surface, extruded monochromatic patterns, a pattern on one or both sides. The disadvantage of such cardboard is that you have to buy it, and some types of such cardboard are not very cheap.

Cardboard bed for a doll

This cardboard doll bed is designed for a large doll - up to 50 cm in height. If necessary, all these dimensions can be reduced.

This option can be done in just 10-20 minutes. There is no need for glue or other fixatives. The pieces are held in place by grooves cut into the cardboard. The width of the groove is equal to the thickness of the cardboard, the length of the slots and the dimensions of the blanks are indicated in the diagram.

The green and yellow dots indicate overlapping cuts. They are inserted one into the other, where the assembly ends. If you like this model, it can also be made from plywood.

Schemes for the manufacture of cardboard doll furniture

Basically, furniture for cardboard dolls is glued. It is unlikely that it will be possible to make something openwork or very complex out of this material, but the manufacture of simple models will not take much time. Having a diagram with dimensions, you can even do without explanation. Everything is so clear.

Such models can be made "by eye". Without “upholstery” they look unsightly, but after that they look pretty decent. A bedside table with doors and an open shelf - the scheme is the same, different execution

Furniture schemes for dolls can be used not only for making cardboard. They can be transferred to plywood and cut with a jigsaw.

Wardrobe for dolls from improvised materials

The toy cabinet can be made of plywood, painted or pasted over with wrapping paper or self-adhesive film. Here, probably, there will be no questions - everything is clear, and if there are questions, you can peep their solution in a “natural” closet. But you can make it from very inexpensive materials. Do-it-yourself furniture for dolls is good because its cost is very low.

From a cardboard box

The main task is to find a cardboard box of the right size. Moreover, it will be easier to work if it is packaging - with folding edges. Such a folding part is a ready-made door. All that remains is to finish it - hang a mirror, attach a handle, etc.

One of the options for home-made furniture for dolls is a wardrobe

What do you need to work

For work, you will need a good adhesive tape, it is better - on a paper basis, since it is then easier to glue the finish to it. If you have a glue gun or a construction stapler (a large clerical one will do) with staples, that’s also good. If you use other materials besides cardboard and paper, it is better to find a universal glue that glues paper, cardboard, fabric, plastic. You will also need scissors and a clerical knife, a ruler.

If the found box is too large, it can be reduced by cutting off the excess. To make the folds even, we take a ruler. we apply it to the place of the future fold, several times we pass well along the ruler with a blunt solid object (the petiole of a spoon or fork). After that, it will be easy to bend the cardboard.

Filling for a toy cabinet

From scraps or from another box, cut out the shelves. They should be slightly - 5-8 mm - longer and wider than the internal space of the cabinet. We bend the excess so that the sides form on all sides. Folds form in the corners, we carefully cut them off. We bend one of the parts by 180 ° and glue it to the shelf itself. This side of the shelf will "look at the world." We bend the other three parts at an angle of 90 °, coat with glue and glue the shelves into the cabinet. The photo on the right shows how the shelves are glued. But, so that the gluing places are not conspicuous, it is better to wrap the sides down.

Making furniture for dolls with your own hands is no less fun than playing with it later.

In addition to shelves, you can also make a crossbar for hangers. It can be made from bamboo skewers, for example, you can try using a juice straw, wire, etc. Hangers can also be twisted from colored wire or cut from juice bags, plastic bottles, etc.

Finishing is a creative process

Next up is finishing. You can paint the cardboard with watercolors or acrylic (better) paints, glue it with wrapping paper, cloth, felt. You can imitate a mirror surface - paste over with foil (food, for example). If you want to make a "plastic" surface, look for water bottles of the right color, cut off the neck and bottom, and use the "body" as a finishing material.

Finishing is a creative process, but to start with, use simpler, softer, thinner materials that are easier to work with.

Handles can be made of wire, beads, long beads. For larger toy cabinets, buttons or buttons can be found. We glue all this “beauty” after we have “sheathed” the cabinet.

Newspaper doll wardrobe

You will need old newspapers, PVA glue with a brush, a glue gun, a couple of pieces of wire or thread, wrapping paper for finishing the cabinet or paint.

We twist dense tubes from newspapers, coat them along the edge of the PVA and leave to dry. Then the tubes can be glued together. A glue gun is best for this operation. There are two ways: first, assemble large blocks, then cut them into fragments of the desired length, or immediately cut the tubes of the desired length and immediately glue the blanks in size. The second way is more painstaking, but there is less waste.

The finished walls of the cabinet must be fastened together. To rigidly fix the angle of 90 °, it is better to use a thin wire. First, coat the joints with glue, then draw the walls one to the other with wire. If the wires are in the way, they can be removed after the glue has dried.

The bottom, top, shelves are glued using the same technology. The doors will need to be done a little differently. In order for them to open, two strips about 1.5 cm wide are cut out of the tape. Tape is glued along the edge of the door so that a little more than half hangs in the air. With this loose adhesive tape we glue the door to the wall, but so that there is a gap of 2-3 mm between the wall and the door (there is just adhesive tape). This will allow the doors to close. We fix the glued door on the other side with a second strip of adhesive tape.

The second way to fix the doors is on the wire. Only this time it should be tough and thick enough. Cut off a piece that is 2 cm longer than the height of the cabinet. Immediately on the wire on one side we make a loop, using 1 cm. We bend the loop at an angle of 90 ° to the wire. We make holes in the bottom and roof, pass the wire through the bottom, the loop remains below. We put a door on the wire, using the outer tube instead of hinges. Slightly bending the wire, we thread it into the hole in the cabinet roof, bend the excess, fixing the door. We repeat the same operation with another door. Please note that it is necessary to fasten the door to the adhesive tape before finishing the cabinet, and it is possible to attach it to the wire after.

There are some other little things that need to be said a few words. Legs and handles for the cabinet can also be made from paper tubes. You just need to twist them from the paper with which you trim the toy. Fold it into a tight roll, glue the edge with glue, then cut it into segments of the desired length and glue it in the right places. Instead of tubes, there can be wooden sticks, beads, etc.

Doll bookcase or ruler shelf

You can make furniture for dolls with your own hands from school wooden rulers. They are good because they are already processed, have the same width and thickness. In the stationery store you can find the right size - larger / smaller, wider / narrower - as desired. For example, to make a doll bookcase, you need 6 rulers 15 cm long.

You will also need a jigsaw to work. If there is an electric one, great, if not, a manual one will do, since there is not too much work. You also need fine-grained sandpaper, glue (PVA or carpentry) and paints (acrylic or gouache).

We cut segments from the rulers: 4 pieces of 6 cm each, one - 8 cm. We sand the edges to an even state, we also remove the markings and barcodes. Between the two rulers we have shelves (which are 6 cm each), on top we leave approximately the same distance - under the lid (a segment of 8 cm). We coat the joints with PVA or carpentry glue, connect and tighten with masking tape, leave for a day. When the glue dries, glue the very last detail - the cover on top. Actually, the shelf itself is ready, it remains to paint it.

To obtain an even and bright color, it is better to cover the structure with white, after drying, already paint with the desired shade. Also, do-it-yourself doll furniture can be decorated with.

Furniture for dolls: photo ideas

You can make furniture for dolls with your own hands from the most unexpected materials. You have already seen how to use newspapers and wooden rulers. But you can make tables, chairs, armchairs, sofas, beds, shelves, cabinets, etc. from ice cream sticks.

Garden bench or sofa - depending on the finish

What is good about this material, you probably already understood - it has rounded processed edges, is the same in size and well processed. If the sticks seem too rough, sand them down to smoothness with fine grit sandpaper.

Clothespins make good armchairs and chairs. They are disassembled into halves and connected with wood glue. Figured products are obtained in almost a few tens of minutes.

Armchair, table - can also be made from clothespins

Almost always, wooden clothespins are used to make doll furniture. But no one forbids taking plastic ones. It is also difficult to work with them in the same way, only the difficulty is that wooden ones are easier to modify by changing the thickness of the shape, etc. If the product is simple, does not require refinement, you can take plastic ones. They are more varied in shape and size, already painted, so there is less fuss with them.

With the growth of skill, you can switch to more complex material - plywood or wood. The difficulty is that turning and cutting miniature parts requires filigree precision, perseverance and takes a lot of time. But you can do whatever you want.

Corner desk for a doll….everything is real

Plywood doll wardrobe - very high fidelity

Nowadays, you can buy almost everything in the store, even furniture for toy dolls. But it is worth noting that this approach is rather monotonous, but a do-it-yourself sofa for dolls is an original approach and individual implementation.

In this case, your imagination is absolutely unlimited, you can do absolutely anything you want.

It is worth noting that there is a great variety of material for a doll sofa, and most do not even have to be bought. You can even make a folding version that will doubly surprise your child. In addition, you can do this needlework right with him, because it perfectly develops fine motor skills of the hands and allows you to spend useful time with your child.

If you do not know how to make a sofa for dolls, then use ordinary matchboxes. They have a stunningly comfortable shape, from which you can fold almost any model of room furniture. The finished sofa can be painted or sheathed with fabric, and it will look great. For this type, ten boxes will be enough, but you can certainly make more massive furniture.

Making a sofa with your own hands is very simple. The process begins with the formation of the seat. Lubricate the edges of the boxes with glue and glue them together. After that we do the back. You should not make it very high, the boxes are still paper and may not withstand mechanical damage, without which not a single children's game can do. Next, the sofa for the dollhouse needs to be decorated, but it is better to sheathe it with a beautiful fabric. It all depends on the creator's imagination: bows, ruffles and other decorations will look very impressive on children's furniture.

cardboard sofa

A sofa for dolls made of cardboard is an opportunity to make furniture that is very similar to the real one. If you do not know how to make a beautiful sofa for dolls, then you should use a small instruction that will help you cope with the task. For work you will need:

• thick and thin cardboard;
• paper;
• textile;
• thread with a needle;
• scissors;
• glue;
• scotch.

You should not think about how to make a fashionable sofa for a doll, you need to act immediately. Even a beginner can easily cope with this task. As everyone already knows, you can make a lot of things out of cardboard with your own hands, and even children's furniture for toys is not at all difficult, but in some places even fascinating. It is worth noting that this activity can be a great hobby, as it is very exciting during the creation of furniture.

First you need to cut the seat for the sofa. It should not be too large, otherwise its fragility will increase. A DIY Barbie sofa can be made from a solid box, using it as a seat if you find the right size. Then we do the back. We cut out the base from thick cardboard and glue it to the base. Since it is not very strong, it should be fixed from the inside with foam rubber. This will not only add volume to the design, but also bring the model closer to the real one in appearance.

Diagram of a doll sofa Stages of creating a sofa

The armrests can also be made from sponges, and then carefully pull them together with threads, making the decor from the relief. It is not difficult to make a paper sofa, and if you take this issue seriously, then the original version can surprise many. After the structure has dried, you need to carefully sheathe it with a cloth. This can be done even with glue, in this case there is no fundamental difference. Then you can completely surrender to your imagination. For Monster High dolls, you can make gothic-style furniture, for ordinary barbies - in pink colors, and so on. In this case, there is only one restriction: do not attach objects that can get into the respiratory tract to the child and do not use elements that are toxic for decoration.

If you do not know how to make an original sofa for a doll at home, then use our tips. In general, you should not limit yourself, in the same way you can make a bed, a chair, a wardrobe and many other original furniture for a child. Remember that a large number of things are made from cardboard with your own hands, the main thing is to show imagination. Moreover, your child will be pleasantly surprised to see a unique thing for games, and will be proud of you and take an example.

What little girl doesn't dream of furniture for her dolls? However, these toys are not cheap. Meanwhile, upholstered furniture, in particular, a sofa, can be made independently. Moreover, for its manufacture, you will only need improvised materials that are in every home, and detailed instructions on how to make a sofa for dolls.

Materials for making doll sofas

Making furniture for dolls is not only a significant savings for the family budget, but also a great opportunity to spend time with children and plunge into the wonderful world of fantasy. At the same time, special materials are not needed for work. Doll sofas can be made from:

• cardboard boxes (from under shoes, juice, equipment, toys, etc.);
• foam rubber sponges for washing dishes;
• polymer clay;
• old wooden boxes, etc.

The easiest way to make comfortable doll furniture is to use the box that the shoes came in.

Materials:

• shoe box;
• a piece of foam rubber or synthetic winterizer;
• fabric (upholstery);
• furniture stapler;
• stationery scissors;
• colored threads for sewing;
• needle.

Instruction:

1. Cut off the narrow part of the shoe box.
2. We cut the upholstery fabric according to the dimensions of the sofa base, making a 1.5 cm allowance for sewing the covers of the back, base and side parts.
3. We sew the cover. We put on the sofa.
4. From foam rubber we cut out rectangles corresponding to the dimensions of the base and side parts of the sofa.
5. We lay the foam rubber under the cover, fasten it with a stapler at the bottom.
6. We make decorative pillows for the sofa. The craft is ready.

We make a doll sofa out of the box

For larger dolls, the sofa should also be larger. For its manufacture, a box is suitable, in which, for example, an iron or a microwave was sold.

Materials:

• box;
• wide tape;
• furniture stapler;
• stationery scissors;
• silicone glue;
• matching color threads;
• thin needle;
• foam rubber;
• upholstery fabric.

Instruction:

1. Cut off the long side of the box.
2. We reduce the left and right parts to the desired size of the side parts of the sofa.
3. With the help of the cut off parts, we form the base box, glue it with adhesive tape.
4. Cut out a sofa cover. To do this, we throw the fabric on the base, fix it at the folds, and on the sides we leave it to hang down beautifully in the spirit of boudoir furniture.
5. We put a pad of foam rubber, fix it with staples using a stapler.
6. From the upholstery fabric and a piece of foam rubber we cut out a decorative pillow. The craft is ready.

Sofa for Monster High made of foam rubber sponges

Graceful Monster High dolls can comfortably sit on a soft sofa made of foam rubber sponges. This material holds its shape well, and the hard side serves as a convenient base for the piece of furniture.

Materials:

• foam sponges of different sizes;
• thick and thin needles for sewing;
• threads;
• dense fabric (satin or velveteen);
• scissors.

Instruction:

1. We lay out a sofa of the desired shape from sponges, rounding some parts with scissors.
2. With a thick needle and thread in several places we intercept the frame, fasten the threads.
3. We cut out the armrests separately.
4. We cut out a rectangle from the fabric and put it on the base of the sofa and the back. We stretch the fabric, carefully grab it in several places and carefully sew it to the bottom of the base.
5. We cut out the upholstery of the side parts, also grab it with threads.
6. With a thin needle we sew the armrests with the frame.
7. We make decorative pillows from fabric and pieces of sponges. The sofa is ready.

Another suitable model for cute monsters is a sofa from an oatmeal box.

Materials:

• cereal box;
• 2 viscose napkins (multi-colored);
• PVA glue;
• silicone glue;
• stationery knife;
• pencil;
• ruler;
• rhinestones.

Instruction:

1. We cut the box along, based on the height of the future seat (about 3 cm).
2. From the cut off part we form the armrests and the back.
3. We combine the parts, glue them.
4. From the napkin we cut out rectangles equal to the width of the seat and back, glue the parts.
5. Paste the back of the back with a napkin of a different color, the same as the armrests.
6. Carefully cut off the protruding excess upholstery.
7. To make the sofa look soft, you can add a couple of layers of napkins to the seat and back.
8. We decorate the finished furniture with rhinestones, gluing them with silicone glue. The sofa is ready.

Learn the basics of working with polymer clay

Those who have the skills to work with polymer clay can make an excellent sofa for a doll out of it.

Materials:

• clay (preferably 2 colors);
• potal (suitable for color);
• stationery knife;
• rolling pin or bottle for rolling clay;
  toothpicks;
• rhinestones (used for manicure);

Instruction:

1. We mix clay with potal.
2. We roll out the seat and back of the future sofa from the material.
3. We fold the parts at a right angle.
4. We roll 2 thin sausages from clay, twist them in the form of a tourniquet.
5. We lay the tourniquet around the perimeter of the sofa seat.
6. We make a plain sausage, lay it on the upper part of the back, slightly twisting the tips to make an imitation of carving.
7. We make small ovals of 2 colors, put them together, slightly round them and apply them to the side parts - these are the armrests of the sofa.
8. On the bottom of the sofa, you can lay out a monogram, decorating with rhinestones.
9. We make sofa legs. From pieces of clay of 2 colors we form cylinders and with a toothpick we make vertical and horizontal decorative lines.
10. Attach the legs to the base.
11. We spread the finished sofa on the foil and put it in the oven to bake.
12. We cover the finished cooled product with varnish. The sofa for the doll is ready.

Another option on how to make a beautiful sofa for a doll is to use an old wooden box. Even a child will cope with this model, and the sofa canapé turns out to be very stylish.

Materials:

• wooden box;
• foam rubber;
• glue;
• textile;
• thread, needle.

Instruction:

1. We drape an open box with a piece of fabric.
2. So that the fabric does not sag on the seat, we put several layers of foam rubber.
3. We fix the fabric with threads, gluing it along the side edges.
4. We make small pillows, decorate them with beads. The sofa is ready.

Almost all girls love to play with dolls, especially barbies. For children, such games become the first experience of family life, passions boil in dollhouses, toy people communicate, everyday situations are played out. Games will not be realistic without an appropriate interior. The decor of the barbie home should be as similar as possible to a real house. If adult women want to have unique things in their wardrobe, then their daughters just need original and beautiful Barbie furniture to be happy. If parents decide to make furniture for Barbie with their own hands, involve their child, then the baby will get an interesting pastime for the evening and new elements for the game.

It is interesting to come up with and make different elements of the situation in a toy house from improvised materials. It is impossible to clearly define the list of necessary tools, it will depend on the imagination of the masters. Suitable for any occasion:

• Scissors;
• Glue;
• Ruler;
• Napkins;
• Oilcloth;
• Threads with needles;
• Pencils.

These things will help create very beautiful details. In fact, it is possible to create furniture using a much larger list of items. For example, to make a lamp with a switch, you may need a blowtorch, LEDs, wires.

It will help in the manufacture of ordinary cardboard. Real masterpieces are created from the material. Making cardboard furniture is an affordable way for everyone to furnish a toy house with quality furniture.

Walkthrough

You can, of course, come up with ways to make furniture yourself, but it will be much easier and more reliable to use drawings, assembly diagrams, instructions that help in the manufacture of toy furniture. All this has been repeatedly tested, and your imagination can run wild at the stage of decoration.

Table

Barbie, like people, has different tables. Manufacturing methods differ slightly depending on the purpose, functionality and design features:

• Dinner table;
• Coffee table;
• Desktop.

Tables are made of cardboard. To give strength to the products, the legs of the tables must be made in the form of cylinders. This form creates additional stiffeners that prevent breakage or deformation. You can fasten them with glue or tape. These substances cannot be spared. The more tape, the stronger the product.

Legs can be attached to the table in two main ways:

• With through holes. To do this, circles are cut out in the tabletop, equal in diameter to the legs of the table. Cylinders are inserted into them, they are leveled in height with each other, the tabletop is lowered so that the cylinders rise about a centimeter above its level. The protruding parts of the cylinders are divided into 3-4 parts, all of them must be tightly glued to the surface of the table. The top of the countertop will not look very aesthetically pleasing, but this can be corrected with decor;
• Gluing the legs to the "wrong side" of the table. The process remains exactly the same, only the legs are divided into strips and glued to the bottom of the table. This allows you to leave the front side intact.

Tables with one leg will not stand stably, therefore, another circle of thick cardboard is fixed below the only support, which gives stability to the structure. For reliability, it is better to use 3-4 legs per product.

Cut out the details

We glue the parts

Armchair

In the photo, such products seem almost real and allow children to create compositions for pictures. This is a rather complex element of furniture, therefore, its manufacture must be approached with all responsibility. It will be most convenient to make a chair made of thick cardboard. Ideal packaging for household appliances. The corrugated middle of these sheets will give strength, and the smooth side parts make it easy to fasten them. A chair without legs and without a large number of small elements will be simple and durable.

1. First you need to come up with the shape of the back of the future chair. It must be schematically drawn on cardboard;
2. Such forms should be glued to each other until a thickness of 0.5-1 cm is reached;
3. Cut out the seat the same way. It should follow the shape of the back. The height of the seat is also gained by gluing several layers of cardboard. Ideally, if it is 4-5 cm;
4. Chair handles can be made from cardboard in the same way;
5. The chair turns out to be angular, flaky and unsightly. You can deal with this with a clerical knife or by covering furniture with a layer of soft fabric.

The chair needs to be made a little more than required, this will allow you to choose any decor elements and use a soft filler for the textile part.

Preparing the boxes

Seat upholstery in fabric

Fixing the fabric with staples

Upholstery with padding polyester

Bed

This element will not cause difficulties, especially if legs are not required. The easiest way is a shoebox bed. The dolls have a comfortable height, making them ideal for many boxes. In this case, you will not have to do almost anything, except to prepare bed linen, pillows and a mattress.

Legs can be attached to the bed, but they should not be made of fragile material. Bottle caps covered with elastic fabric or painted with acrylic paint in the desired color are perfect. It is most convenient to attach them to a cardboard bed on a wire. It, like threads, is threaded in two places into cardboard and connected with a twist. To prevent the metal from tearing the cardboard, the wire is attached to several toothpicks placed between the puncture points.

The sides of the bed should be hidden with a cloth, sticky paper or a soft strip created from a padding polyester glued to the surface and covered with a cloth. You can create a canopy bed. Usually it is attached from above, on thin legs. It is impossible to create thin and strong legs from cardboard, so parents will have to make them from another material. You can use old pens pasted over with beautiful elements. Thin tulle is hung on these racks. For strength, 4 vertical supports are connected with strong and thin sticks. They are connected to each other with adhesive tape.

The duvet should be about 1.5 times the size of the bed in all directions. Thus, wrapping the doll is not difficult. A large blanket can be used as a carpet if desired.

Cut pieces out of the box

We connect the elements with masking tape

We paint the workpiece

We make and fasten ruffles

Sofa

The sofa is very similar in design to the armchair. It is made in the same way, by connecting layers. However, there is an easier way:

1. First you need to determine the dimensions of the future sofa and choose the most suitable shoe box in size;
2. One of the long sides must be cut out immediately. You can leave a strip 1 cm high at the bottom;
3. Cut out the curly back and armrests, you can leave them square;
4. A rectangle the size of the bottom of the box is cut out of polystyrene 1–2 cm thick;
5. Exactly the same size piece of synthetic winterizer or any other soft material;
6. These parts overlap each other and are covered with fabric. This will be the seat. It is placed on the bottom, and the left centimeter of cardboard does not allow the soft part to fall;
7. Exactly the same fabric is covered with other parts of the sofa. A soft synthetic winterizer must be glued to the surfaces and only then covered with a cloth;
8. The legs are made from corks. This is a durable and easily accessible material that allows cardboard furniture to serve for a long time. They are attached to the sofa with wire and toothpicks, as mentioned in the section on making the bed.

Attaching fabric to cardboard

We fix the sides and seats of the sofa

Making pillows

Glue pillows

Dresser

Parents are thinking about how to make furniture for Barbie also functional, and not just beautiful. The chest of drawers should be openable and can hold toy items such as hairbrushes, bows and shoes for dolls. To make a toy chest of drawers, several matchboxes will come in handy. They easily create the possibility of storing things:

1. The boxes need to be painted first. To do this, remove the grater for lighting matches and apply paint;
2. Each next box is attached to the previous one with glue;
3. They can be wrapped with tape around the perimeter, this will prevent peeling and help to further strengthen the structure;
4. For ease of opening, it is necessary to make handles. Buttons on the leg are suitable for this. You can just sew them on.

You can create a dressing table, then you need two such chests of drawers, a tabletop between them and a mirror. It is made of cardboard, pasted over with a mirror film or silver tape. The mirror is attached to the back wall, it can be its continuation. For strength, this part must be glued to the chest of drawers.

Preparing matchboxes

Cut out the sides and back

We paint coatings

Making pens

decoration

To decorate furniture for the house, you will need a variety of props: scraps of fabrics, unnecessary cream boxes, pieces of cardboard, broken pencils, empty pastes from pens, decorations torn from rubber bands, unpaired socks, torn off buttons, and many more seemingly unnecessary little things.

• The soft parts of beds, sofas and armchairs are made of synthetic winterizer. It is a cheap and readily available material. It can be found even at home, if you rip open an unnecessary jacket;
• Pillows are stuffed with the same padding polyester. They can be sewn on a typewriter, but you will have to sew up the remaining stuffing hole manually, this makes the product much neater;
• Paper is used to make accessories and furniture. This is where colored paper comes in handy. It is better to use a double-sided option, this will help make the elements completely painted in one color;
• Buttons are needed to create handles on bedside tables and chests of drawers. Small buttons are used to create beautiful pillows, blankets, tablecloths;
• All elements must be in the same style. This is ensured by using the same materials. Usually people do not store very small scraps of fabrics at home, so this item will not cause difficulties;
• The adhesive film will help imitate a wooden surface, making it easy to make almost wooden furniture out of cardboard furniture. A beautiful adhesive tape with a pattern or lace saves time on decoration and helps not only to fasten the elements, but also to decorate them. Using these tools at the same time, you can effortlessly create a beautiful element, especially if the lace tape is in a contrasting color to the film.

For the manufacture ofdo-it-yourself furniture for barbieit will be convenient to purchase several meters of a beautiful tape in advance. It will close ugly joints, divert attention from glue smudges, mask adhesive tape. All materials for decor are prepared in advance, matched to the tone and stocked up for future use.

Probably every little girl has a dream to have a dollhouse with toy furniture. Of course, at present, it is possible to purchase ready-made furniture for a dollhouse in children's toy stores without any problems. But not always parents have such an opportunity. In addition, you can make doll interior items with your own hands without spending money on it. And for this you can use the simplest materials at hand.

Let's take a closer look at how to make a sofa for dolls with your own hands. Moreover, such a sofa for Barbie can be made together with your child.

In contact with

How to make a sofa for dolls with your own hands?

The principle of making such a sofa for Barbie is very simple. The job does not require any specific skills. The master classes below describe several ways to make doll sofas. All options can be somehow improved and changed outwardly according to your own taste and discretion. If you replace the base, you can change the shape and size of the product.

In this case, we use cardboard boxes as the basis. Ideal boxes for shoes, toys, household appliances. You can also use well-washed and dried juice containers.

As the upholstery of the sofa, you can use various materials:

• Cotton wool;
• Foam rubber;
• Sintepon;
• Polyethylene film;
• Pimply polyethylene;
• Soft fabric, folded several times.

You can also use a variety of materials to upholster a barbie sofa:

• Pieces from an old bathhouse;
• Old jeans;
• Real furniture upholstery and more.

As a rule, several methods are used to secure the fabric:

• Sew by hand;
• Sew on a sewing machine;
• Fasten with a regular stapler.

Option 1. Do-it-yourself sofa for dolls: master class

To make a toy doll sofa, you will need the following materials and auxiliary tools:

• Shoe cardboard box;
• A piece of foam rubber;
• Old pieces of fabric;
• stapler;
• Scissors;
• Threads with a needle.

• Cut off the long side of the cardboard box. The rest will act as sofa bases.
• On the base you need to try on a piece of fabric for sofa upholstery. To do this, it must be wrapped around the box on the back and bottom. We cut off the excess part of the fabric, and sew the rest in such a way that we get a cover. In the same way, it is necessary to do with a piece of fabric on the sides of our sofa.
• When the covers are ready, they must be put on the corresponding sides of the sofa. In this case, the back must be filled with foam rubber or other filler. At the same time, the fabric must be folded and secured with staples and a stapler.
• Measure the size of the base of our sofa, add the desired height and measure the required fabric size for sewing the sofa cushion.
• Sew a sofa cushion from fabric and stuff it with foam rubber or other filler, put it on the base of the sofa.

Our doll sofa is completely ready! To decorate it, you can also sew a few small pillows.

Option 2. Do-it-yourself sofa for dolls: master class

Now consider the option of a brighter sofa and a little modified compared to the previous version. We will use a large box cut into several pieces. To make a sofa, you will need the following materials and auxiliary tools:

• A large cardboard box from under a toy or household appliances;
• Foam rubber or other filler;
• Pieces of bright fabric;
• Super glue;
• stapler;
• Scissors;
• Scotch;
• Needle with thread.

Step by step manufacturing instructions:

• First you need to imagine what our sofa will look like and cut it out of the box base components. Assemble the cardboard base by securing its parts with adhesive tape.
• Cut out of foam product back, sides and bottom. Glue the foam rubber to the cardboard using glue.
• Next, you need to sew side covers making them slightly longer. When the covers are ready, put them on our sofa. All excess fabric will sag slightly, thereby creating the effect of boudoir drapery. Cover the lower part of the sofa and the back back with sheathing material and secure with a stapler or adhesive tape.
• Made from foam rubber and fabric sofa cushions and small pillows for decoration. As an addition to the pillows, satin can be sewn on.
• In conclusion, it remains only to assemble the base of the product and pillows.

How to make a folding sofa for dolls with your own hands?

The manufacture of such a design will be a little more complicated than the previous options. For this, a completely different material is also used so that the sofa does not break during the transformation process. Such a doll sofa will be made from. Only dad can handle this job. For manufacturing, you will need the following materials and auxiliary tools:

• Plywood;
• Furniture stapler;
• Nails for furniture;
• small awnings;
• Jigsaw.

Step by step manufacturing instructions:

• Use a jigsaw to cut details for future product. These details include: a back, side parts, three bases, one of which will be a seat, and the rest will be retractable. It is most convenient if the sliding mechanism is an accordion or a book.
• All withdrawable parts must be connected to each other using small canopies. The remaining parts of the future sofa can be connected with carnations.
• When the body of the product is fully assembled, you can proceed directly to sofa exterior. It is recommended to put foam rubber under it. Further, finishing occurs according to the methods described above.

Such a doll sofa will become a real work of art. Similarly, it can be made from sponges for washing dishes. Even the mother herself can do this option. The main thing in this case is to come up with a way to transform. This method can be seen in real sofas.

In addition to our product, you can make additional elements in the form of ottomans, chairs. The principle of assembly in this case will be the same as that of the sofa. Thus, you can arrange a whole dollhouse.