HOME Visas Visa to Greece Visa to Greece for Russians in 2016: is it necessary, how to do it

How to enter bios on an asus laptop. How to enter BIOS on an asus laptop

How to enter BIOS on an ASUS laptop

Many ASUS laptop users do not know how to enter the BIOS. You can easily and simply set up your computer yourself with our help. And if you need qualified assistance from specialists, then contact the ASUS laptop diagnostics and repair service center.

In order to enter the BIOS on an ASUS k56c, x553m, x540s, x550c laptop on Windows 7, 8,10, you can use the keys or the system.

It is worth noting that it all depends on the brand of the device. The general rule is this: wait for the device to boot and click “Delete”. But ASUS laptops have their own secrets.

How to enter BIOS on an Asus Windows 7 laptop

Most often, you can see the key combination to enter the BIOS on the screen of your device. Most likely the system refers to the F2 key - you need to press and hold it until Windows loads.

If it is not there for some reason, then you can experiment. Hold down "Delete" and the "F2" button at the same time; if this does not help, try the combination of "Ctrl" and "F2". Some of the ASUS laptops enter the BIOS thanks to these keys. If your device is ASUS X552W, then you should simultaneously hold down the “Shift” and “f2” keys in order to enter the BIOS.

You can also use the key combinations “Ctrl+Alt+Del” or “Ctrl+Alt+Ins”, “Ctrl+Alt+Enter” or “Fn+F1”, “Ctrl+Ins”. These combinations are not required very often; in most cases, the above are sufficient. In order to call the boot menu you need to use the following keys: F11, F12, F8, Esc. If it fails to start, it can be disabled directly in the BIOS. To activate it you need to go to Bios, select the “Boot Menu” option, and “Enable”.

How to enter BIOS on an Asus Windows 8 laptop

It is necessary to configure subsequent inclusion in the BIOS by changing the computer settings. To do this, go to the general settings menu item and special boot options. Here you need to indicate in the reboot request that you need device diagnostics. Next, under Diagnostics, in Advanced Settings, find UEFI Firmware Settings.

How to enter BIOS on an Asus Windows 10 laptop

The procedure is very simple, you need to set the BIOS entry command before loading Windows OS. While your laptop is running, press and hold the shift key. A window will appear on your screen where you need to select the reboot option.

We hope that we were able to help you, and now you feel much more confident as a user of your laptop. The BIOS menu will help you configure your device and will be a good assistant.

A component such as the BIOS on an asus laptop is an extremely complex memory component that monitors the general state of the entire computer and promptly informs the user about any problems in its operation. The abbreviation itself stands for basic input and output system. It is present on every laptop, regardless of the model and country of origin. It is this software that checks all its components before starting the computer, and if one of the components in the laptop is faulty, then it simply stops starting. Naturally, the user is not happy with this scenario, but the BIOS itself on the laptop works properly. After all, it was created to track problems with component devices.

How to access BIOS?

Answering the question about how to enter such a component as, I would like to note that absolutely all computers are individual.

That is why each BIOS on a laptop starts differently and the question of how to enter it can only be explained superficially. If we look at the BIOS on a laptop in more depth, we will have to go through a lot of options before we can find the answer to the question of how to enter it.

So, what is the initial algorithm of actions when answering the question of how to enter the BIOS component:

Description of each action

For those who, for some reason, were unable to enter the BIOS, it makes sense to consider each step separately.

Continuing to answer the question of how to enter this component, I would like to dwell in more detail on the second point. After all, it implies a fairly quick reaction, the absence of which may be observed among novice users. In order to press the appropriate button in time, you must carefully monitor the signals of the device itself, which will definitely show you how to enter. In particular, if you find a screensaver on the monitor screen with the motherboard manufacturer, which will appear in any case, you need to immediately press the button. And this, in fact, is the end of the question of how to enter this component.

The third point implies such a crucial moment as setting up this component on an ASUS laptop. Its configuration, of course, is not required at all, because the factory parameters are already set properly. And yet, in some cases, setting up some modules is simply necessary. For example, tuning the processor parameters module may be required when overclocking the latter to certain parameters. The setting can also come in handy when you need to set download priorities. In other words, make sure that the disk or flash card is loaded before the main system boot. It is in such cases that sometimes even detailed configuration of modules is needed.

Some important points when working with BIOS

As practice shows, the question of how to enter the BIOS cannot be called problematic, because there is nothing particularly complicated here. Of course, the average user may not be able to enter the BIOS, however, with proper mastery of the program, this process can be easily learned.

It also happens that you cannot enter the BIOS running on an ASUS laptop due to the lack of standard buttons in the settings for calling this component. In this case, in order to enter the BIOS, you need to try all the F buttons on the ASUS laptop. After all, the BIOS must be present on the laptop, so you can access it.

It should be noted that entering the BIOS is usually done only through the standard buttons listed above, and not only on an ASUS laptop. Naturally, as already noted, the laptop buttons for calling a component can be changed, but, as a rule, device manufacturers do not resort to this kind of upgrades, realizing that it will be much more difficult for users to configure modules in this case. That is why problems with BIOS practically do not arise, especially if we are talking about experienced users.

And, of course, I would really like to remind you that in this component you should not change the parameters of anything that is not clear. The fact is that BIOS is a rather complex and balanced system, where absolutely all components are responsible for some part of the computer’s support. It is not difficult to guess that if you change any module, all the others that depend on it may simply stop starting and ultimately the device simply will not boot. Naturally, no one needs such a development of events, because in this case you will have to take your device to special workshops that can. And this will cost its owner quite a considerable amount. Moreover, no one can guarantee that such a procedure will end successfully.

On an Asus laptop and configure it correctly. Unlike stationary system units, mobile computers do not have a high level of unification. If in the first case only the Del key is used everywhere to enter, then there may be various options. It is the most common options for entering basic PC settings that will be presented within the framework of this material. Practical recommendations regarding BIOS settings will also be given.

BIOS is the basic input/output system. It stores the basic computer settings (date, time, type of installed processor, size and model of connected drives). That is, the information without which a PC cannot function. In most cases, the default settings are sufficient: the computer boots and everything is fine. But this approach is not entirely justified. It is necessary to set optimized parameters that allow you to reduce loading time and use resources more efficiently. Physically, it is a chip with volatile memory that is installed on the motherboard. Its operation is impossible without a battery. Once the battery is dead, it needs to be replaced on the motherboard. Otherwise, you will have to set the required values ​​each time you boot, which is not entirely convenient. The BIOS is launched on an Asus laptop or a device from any other manufacturer after power is applied. After this, the equipment condition is tested. Before the beginning

After loading the operating system, you can go to the basic input/output system. It is impossible to do this while it is running, since some of its values ​​are used for the full functioning of the OS.

Basic login options

The easiest way to find out how to enter the BIOS on an Asus laptop is in the user manual that comes with the mobile PC. It's definitely indicated there. But such documentation is not always available. Then you can try to determine this during the download process. To do this, after turning on the power, look at the screen. If the manufacturer's logo appears, you need to press Esc. On the black screen you need to find the following inscription: Enter to setup... Instead of an ellipsis, the required key or combination thereof will be indicated. This inscription will be either at the bottom of the screen or at the top, at the end of the text. Its location depends on the device model. As practice shows, this Taiwanese manufacturer most often uses the following options:

  • Ctrl+F2.

Therefore, if you couldn’t figure out how to enter the BIOS on an Asus laptop using one of the two previously mentioned methods, then you can try to determine this using the selection method. That is, when you first start the mobile PC, press the first key of them and look at the result. If we can’t log in, we’ll use the combination the next time we boot. And finally, we use the third option. In most cases, one of the three proposed options should definitely work.

BIOS sections

Now let's find out what sections the basic input/output system consists of on a device such as an Asus laptop. Entering the BIOS is not difficult if you follow the instructions that were outlined in the previous section of the article. After this, a blue window will open. At the top there will be a menu that consists of the following items:

  • Main - basic PC parameters (processor type, date, time, amount and type of installed memory).
  • Advanced - advanced settings (interrupt system and other values, this section can only be configured by an advanced user).
  • Power - energy consumption and voltage on the main components of the system unit.
  • Boot - system boot order.
  • Exit - options for exiting the BIOS.

To navigate between them you need to use the cursor keys. When entering, press Enter. To make changes, the keys can be either PgDn and PgUp, or F5 and F6. By the way, all possible key actions are indicated in the tooltip. In the main window it is located at the bottom, and in the rest - on the right in the column. Its only drawback is that it is in English. Therefore, those who are not familiar with this language will experience certain difficulties at first when working in BIOS.

Settings

The simplest BIOS setup on an Asus laptop can be done as follows. After logging into this system, go to the Exit tab. On it we find the item Load optimized defaults and press “Enter”. A prompt will appear that you must answer positively. That is, click OK. After that, go to Save and exit setup and press Enter. Next, the laptop will reboot normally. The manipulations performed are sufficient to significantly speed up the equipment testing process.

Checking changes

If you decide to select more subtle system settings, then it is better to restart the Asus laptop after each parameter change. Entering the BIOS during the next similar procedure will not be difficult. In this case, it will be possible to observe the resulting effect with your own eyes. Some parameters are critical, and if they are set incorrectly, you can easily and simply determine the cause of the problem. But if several changes were made at the same time, this issue cannot be resolved so easily.

Several basic I/O system settings can speed up the initialization process for a device like an Asus laptop. In this case, as noted earlier, you will have to enter the BIOS several times. You immediately need to establish the order in which the boot device is selected. To do this, go to the Boot menu section. In it, as First Boot, you need to install exactly the hard drive (the PgDn and PgUp or F5 and F6 keys are used, there is always a hint on the right on how to perform this manipulation) on which the operating system is physically located. The same parameter is sent before installation either to a flash drive or to a CD (depending on where this procedure will be performed from). The following boot sources (Second Boot, Third Boot) should be Disabled to avoid misunderstandings. It is recommended to install Other Boot in the same way. Next, you need to disable the display of the mobile PC manufacturer's logo. It may hide important messages about the state of the computer hardware during the testing phase. To do this, go to the Advanced section and find the Logo On item. We also change it to Disabled using the previously described method. Then save the changes and restart the laptop. Loading the BIOS on an Asus laptop will then be visible with your own eyes, and not hidden behind the manufacturer’s logo.

Disable unnecessary tests

The last important parameter that must be changed is Qick Power. It is located in the same section, and when it is enabled (Enabled value), a number of tests are performed that are not needed during normal loading. Therefore, it must be disabled, that is, set to Disabled. After deactivating it, the PC boot speed should increase significantly. If each of the previously listed parameters is set to the recommended value by default, then there is no need to make changes.

Conclusion

This article described not only how to enter the BIOS on an Asus laptop, but also how to configure it. There is nothing complicated in this operation, and the correct parameters allow you to optimize the PC boot order and use its resources more efficiently.

ASUS is a Taiwanese manufacturer of computer equipment, components and laptops. At least a quarter of all computers in the world are assembled on the basis of motherboards from this company. This manufacturer equips its boards with different BIOS versions. Therefore, there are several ways to enter the BIOS on Asus.

Instructions

  • The simplest case is when you need to enter the BIOS of a personal computer. Turn on the computer and press the DEL button several times as soon as the screen lights up. On modern ASUS motherboards, the most commonly used key to enter system settings is DEL.
  • If the computer was turned on, restart it. Also click the restart button if you have already seen the Windows logo. Sometimes the computer boots up so quickly that it becomes difficult to catch the right moment and enter the BIOS. Please note that BIOS is the basic input and output system. That is, when you press the power button, the components immediately begin polling and work to load the operating system.
  • Press the F10 or F12 button when starting your PC if you have an old computer (motherboard).
  • To enter the BIOS on an ASUS laptop or netbook, press the F2 key after turning on the power. These devices usually have a more complex BIOS and can boot even faster than a regular PC. The firmware of a laptop computer often contains advanced security settings, control of the touchpad, that is, a mouse substitute, as well as an additional operating system with “instant boot”. The vast majority of models known today use F2 to access the computer’s system settings.
  • In very rare cases, a key combination is used. If you couldn’t get into the BIOS by pressing F2, most likely this is your case. Then, immediately after turning it on, press the Ctrl button and, without releasing it, press F2 several times. Remember that the screen prompting you to press a button and enter the BIOS can flash very quickly, so try pressing the key several times when starting your computer or laptop.
  • If you have a new laptop or computer and have not yet installed the operating system, but cannot enter the BIOS by pressing Del, F2 or Ctrl+F2, then replacing the keyboard may help. Connect an external keyboard and try the above options again.

    • Quite often, users have a question: How to open BIOS on a laptop and what is it? The basic input/output system is responsible for the normal startup of the PC and the operation of its devices.

    What circumstances force you to run the BIOS?

    1. Integrated computer components need to be turned on or off.
    2. Replacing the video card. Many laptop computers have two graphics cards built into them. Thanks to the input-output system, the user selects either the first or the second.
    3. Setting up special laptop modes. Here the computer owner can configure various modes (hibernation, sleep mode).
    4. Adjusting the time in the system. The system allows you to adjust the time that requires such manipulations, often after resetting the settings.
    5. The need to check the “well-being” of the computer. Through Bios you can monitor many PC parameters.
    6. Returning default settings. By opening the control system, you have the opportunity to restore the system settings to their original state.

    This article will describe a step-by-step algorithm on how to launch Bios on a laptop. After reading it, you will understand that opening this system on your computer is not difficult.

    Running the system on a desktop computer and a laptop does not have any special differences.

    Starting the I/O system

    Firstly, to open it, you need to restart your computer. To do this, you will need to click on the “Start” button and find the shutdown/restart button in the panel that appears. The button is located in the lower left corner of the panel.

    You can also restart the device by pressing and holding the start/shutdown key, which is (most often) located in the upper right corner of the keyboard. After completely turning off the laptop, you need to press the same key again and start the computer.


    You need to open the settings before the computer is fully booted. Most often, when loading, it says at the bottom: Press F1 to enter setup (press F1)


    In addition to F1, there can be any other keys, for example:

    • DELETE

    Sometimes you need to press a combination:

    • Ctrl+Alt+Del
    • Fn+F1
    • Ctrl+Alt+Esc
    • Ctrl+Alt
    • Ctrl+Alt+Ins
    • Ctrl+Alt+S
    • Ctrl+Ins
    • Ctrl+Alt+Enter

    If you did not have time to press the buttons to log in, you should turn off and start the computer again.

    Having completed all the steps correctly, you will see a window open in front of you.


    Now let's look at how to run the setup on PCs from different companies.

    How to run BIOS on an Asus laptop

    First you need to turn off your computer. Then turn it on, often press F2 (or keep the key pressed at the same time as the laptop start button). Thus, opening the BIOS on an Asus portable device will not be difficult.

    How to open Bios on an HP laptop

    To launch Bios in Hewlett-Parkard, (HP Pavilion, TouchSmart, Vectra, OmniBook, Tablet) you need to either actively press or hold down the F1 key.
    To open Bios in Hewlett-Parkard (HP Alternative)- press F2 or Esc in the same way.
    To log in Hewlett-Parkard (HP) Tablet PC- press F10 or F12.

    How to run BIOS on a Lenovo laptop

    You can open the BIOS on a Lenovo laptop using a simple method, that is, by pressing special buttons when turning it on. At the beginning of loading, you need to press and hold the Fn key. While holding it, you also need to actively press F2.


    Second method: special button “Novo Button”. It shows a curved arrow. After turning off the computer, instead of the start button, press the “Novo Button” key.


    “Novo Button Menu” will open in front of you, where you will see various download methods. In second place will be BIOS Setup.
    We point the arrows at it.


    Click. Ready.

    How to run Bios on an Acer laptop

    To open Bios on an Acer laptop, you need to actively press or hold F2. If the BIOS does not open in front of you, then you need to try other standard keys for turning on the control system, such as: DELETE or the combination Ctrl + Alt + Esc.

    How to run BIOS on a Samsung laptop

    When you turn it on, press the “pause” or “Fn+pause” button.


    You should see “press F2 (f8, f12, f4, etc.) to enter setup.” Based on which button (f2, f12, f4, f8...) appears in the line, we select that one to press.
    Improve your computer knowledge every day, as the twenty-first century forces us all to keep up with the times, actively learning many modern technological processes!

    Have a great day!